SC3900

Suitable for low and medium temperature vacuum processes, cost effective. Uniform thickness of the product can provide high quality surface effect. Good mould release after curing. Available in perforated and non-perforated options. Best choice for prepreg and carbon board products.

Technical data

SAFECLEAR®3900 It is a release film specially designed for low-cost vacuum processes, suitable for epoxy, ethylene Base, polyester resin system. Temperature resistance reaches 158℃ Applied directly on the back of the ply, it can provide a smooth watchface effect

Thickness	Width	Winding method
40μm	1.5m	flake

Material	polyolefin
Elongation at break	480%
Tensile strength	16Mpa
Maximum applicable temperature	158℃
Color	red

The width and length can be customized according to customer requirements, and holes can be punched as required. Please contact our company.

Packaging and storage

Should be stored in a dry, dark place, avoid exposure to the sun. Storage conditions: humidity 65±20% RH, temperature 5-30 ℃. Place the isolation film should be smooth, remove sharp objects, so as not to puncture the film. When handling and using, handle with care. When using the product, pay attention to the protection of the film surface, do not place or contact sharp objects, so as not to puncture the film. The storage period should not exceed 2 years.